- Total R 0.00
Provide reliable temporary illumination for construction sites, road maintenance, mining operations, emergency response, industrial work, outdoor events, and remote locations with the ANJ6150 Mobile Lighting Tower.
The lighting tower is available with metal-halide or LED lamp configurations, gasoline or diesel generator options, and manual or hydraulic mast lifting. Depending on the selected version, it may include two 1,000W lamps, four 400W lamps, four 300W LED lights, or four 200W LED lights.
Each machine configuration should be listed separately with its exact lamp technology, luminous output, generator capacity, fuel tank, runtime, mast height, dimensions, weight, and price.
Mobile work-site lighting system
Metal-halide or LED lamp configurations
Up to 6 m standard mast height
Optional 7 m hydraulic mast version
Hand-cranked or hydraulic lifting
Gasoline or diesel generator options
3 kW or 5 kW generator configurations
Adjustable individual lamp switching
Four stabilizing outriggers
12-inch pneumatic tyres
Push-handle steering
Integrated wheel brake
Level 8 listed wind resistance
AC 220V electrical output
50 Hz or 60 Hz configurations
IP65-rated components, subject to verification
One-year warranty
Brand: ANJ
Model: ANJ6150
Product Type: Mobile Lighting Tower
Primary Light Source: Metal-Halide Lamp
Alternative Light Source: LED
Bulb Base: E40 on Applicable Metal-Halide Models
Input Voltage: AC 220V ±10%
Rated Generator Voltage: AC 220V
Frequency: 50 Hz or 60 Hz
Colour Temperature: Approximately 5000K–6000K for LED Versions
Metal-Halide Colour Temperature: Approximately 5400K
Colour Rendering Index: Ra 80
Listed Efficiency: Approximately 110 lm/W, subject to configuration
Listed Luminous Output: 330,000 lm, subject to verification
Verified Output Range in Comparison Table: Approximately 96,000–220,000 lm
Beam Angle: Approximately 60°
Protection Rating: IP65
Mast Material: Q235 Steel
Standard Mast Height: Approximately 6 m
Optional Mast Height: Approximately 7 m
Standard Lifting Method: Hand-Cranked
Optional Lifting Method: Hydraulic
Generator Power Options: 3 kW or 5 kW
Fuel Options: Gasoline or Diesel
Fuel-Tank Options: Approximately 12 L, 15 L, 16 L, or 25 L
Listed Runtime: Approximately 8–13 Hours
Engine Type: Single-Cylinder, Four-Stroke, Air-Cooled
Starting Options: Recoil Start or Electric Start
Generator Enclosure: Open-Frame or Silent Type
Wind Resistance: Listed as Level 8
Stabilizers: Four
Tyres: 12-Inch Pneumatic Tyres
Brake: Included
Lamp Controls: Main Switch and Individual Lamp Switches
Steering: Push-Handle Control
Machine Weight: Approximately 245–300 kg
Overall Dimensions: Approximately 1200 × 950 × 2100–2200 mm
Working Life: Up to Approximately 10,000 Hours for Listed Metal-Halide Lamps
Warranty: One Year
Country of Origin: Shanghai, China
The supplied comparison table includes five different lighting-tower configurations.
Four 200W or four 400W LED lamps
Approximately 96,000 or 192,000 lm
6 m hand-cranked mast
3 kW or 5 kW generator
Gasoline or diesel engine
Recoil start
Open-frame structure
Approximately 245 kg
Approximate dimensions: 1200 × 950 × 2100 mm
Two 1,000W or four 400W metal-halide lamps
Approximately 220,000 or 176,000 lm
6 m hand-cranked mast
3 kW or 5 kW generator
Diesel engine
Electric start
Open-frame structure
Approximately 265 kg
Approximate dimensions: 1200 × 950 × 2100 mm
One 1,000W metal-halide lamp
Approximately 110,000 lm
6 m hand-cranked mast
3 kW or 5 kW diesel generator
Electric start
Open-frame structure
Approximately 279 kg
Approximate dimensions: 1200 × 950 × 2200 mm
Four 300W LED lamps
Approximately 144,000 lm
6 m hand-cranked mast
5 kW silent diesel generator
16 L fuel tank
Electric start
Approximately 280 kg
Approximate dimensions: 1200 × 950 × 2200 mm
Four 200W LED lamps
Approximately 96,000 lm
7 m hydraulic mast
5 kW silent diesel generator
16 L fuel tank
Electric start
Approximately 300 kg
Approximate dimensions: 1200 × 950 × 2100 mm
These configurations should not share one price or one technical specification table.
The top specification lists approximately 330,000 lumens.
The detailed comparison table lists outputs including:
96,000 lm
110,000 lm
144,000 lm
176,000 lm
192,000 lm
220,000 lm
The 330,000-lumen value may belong to:
A different lamp package
A custom high-output model
A combined theoretical value
Incorrect marketplace data
Before publication, verify:
Number of lamps
Wattage per lamp
Lamp technology
Actual output per lamp
Complete system output
Photometric test report
Selected ANJ6150 configurations use metal-halide lamps.
Potential characteristics include:
High-intensity white light
Broad work-site illumination
Approximately 5400K colour temperature
E40 lamp-base compatibility
Warm-up period before full brightness
Restart delay after hot shutdown
Ballast requirement
Listed service life around 10,000 hours
Before publication, confirm:
Lamp manufacturer
Lamp wattage
Ballast type
Startup duration
Hot-restart time
Replacement-lamp availability
Lumen maintenance
The comparison table also includes LED models with:
Four 200W lamps
Four 300W lamps
Four 400W lamps
LED versions may provide:
Instant startup
Lower maintenance
Reduced power consumption
Longer potential service life
Easier individual lamp control
Reduced restart delay
LED and metal-halide models should use separate titles and descriptions.
The listed beam angle is approximately 60 degrees.
Before publication, confirm whether this applies to:
Each individual lamp
Metal-halide reflector
LED floodlight optics
One specific model only
The complete site coverage also depends on mast height, lamp direction, lamp quantity, and spacing.
Most listed configurations use a hand-cranked lifting system.
Before publication, confirm:
Winch load rating
Cable material
Mast-section quantity
Safety brake
Mechanical locking pins
Raising time
Lowering time
Inspection interval
Emergency lowering method
The 7 m version uses hydraulic lifting.
Confirm:
Hydraulic pump type
Operating voltage
Maximum pressure
Raising time
Lowering time
Emergency manual release
Oil specification
Maintenance interval
Safety valve
The mast is listed as Q235 steel.
Before publication, confirm:
Surface treatment
Paint or powder-coating thickness
Galvanization options
Corrosion resistance
Mast-wall thickness
Maximum lamp-head load
Wind-load testing
Generator capacities include approximately:
3 kW
5 kW
Before publication, confirm whether these represent:
Continuous rated output
Maximum output
Lighting-only output
Total auxiliary output
The generator must be sized for:
Lamp load
Ballast starting current
Mast controls
Battery charging
Auxiliary sockets
Electrical losses
The product range includes gasoline and diesel engines.
Potential advantages may include:
Lower initial cost
Easier cold starting
Lower machine weight
Potential advantages may include:
Longer continuous operation
Better fuel economy under industrial loads
Greater durability for frequent use
Each engine type should have separate emissions, runtime, maintenance, and fuel-consumption data.
Listed fuel-tank options include:
12 L
15 L
16 L
25 L
The selected capacity depends on engine and generator configuration.
Before publication, confirm:
Fuel consumption at full load
Fuel consumption at typical lighting load
Continuous runtime
Fuel gauge
Low-fuel warning
Tank material
Refuelling access
Runtime values include:
Approximately 8–13 hours
Approximately 10 hours
Actual runtime depends on:
Tank capacity
Engine type
Generator load
Lamp configuration
Fuel quality
Maintenance condition
Ambient temperature
The final listing should provide one verified runtime per machine configuration.
The comparison table includes both open-frame and silent generator structures.
May provide:
Easier service access
Lower weight
Lower initial cost
Higher operating noise
May provide:
Reduced noise
Enclosed components
Improved weather protection
Higher weight
Different ventilation requirements
Confirm exact sound levels at a specified distance.
The lighting tower is listed with Level 8 wind resistance.
Before publication, confirm:
Wind-speed equivalent
Mast height during testing
Stabilizer deployment
Ground conditions
Lamp orientation
Test standard
Safety factor
Wind resistance should not be advertised without stating the operating configuration.
Four stabilizing supports are listed.
Before mast extension:
Position the machine on firm ground
Apply the wheel brake
Extend all stabilizers
Level the machine
Confirm safe wind conditions
Before publication, confirm stabilizer extension, ground-pad size, and maximum permitted slope.
The tower uses 12-inch pneumatic tyres and push-handle steering.
Confirm:
Wheel quantity
Tyre pressure
Parking-brake type
Maximum manual-moving slope
Towing capability
Total machine width
Ground clearance
Do not advertise trailer towing unless a certified tow hitch is included.
The lighting tower includes:
Main electrical switch
Individual lamp switches
Before publication, confirm:
Circuit-breaker ratings
Emergency stop
Residual-current protection
Grounding point
Overload protection
Output sockets
Voltage meter
Frequency meter
Hour meter
The listed IP65 rating may indicate:
Dust-tight construction
Resistance to low-pressure water jets
Confirm whether IP65 applies to:
Lamp housings
Electrical control panel
Generator enclosure
Cable connectors
Complete lighting tower
The complete machine should only carry the rating if the entire system was tested.
Depending on the selected configuration, dimensions are approximately:
1200 × 950 × 2100 mm
1200 × 950 × 2200 mm
Weight ranges from approximately:
245 kg
265 kg
279 kg
280 kg
300 kg
The final listing should specify whether dimensions and weight are measured:
With mast lowered
With fuel
With generator
With lamps installed
With stabilizers retracted
The ANJ6150 mobile lighting tower may be suitable for:
Construction sites
Road maintenance
Mining and quarry operations
Emergency response
Disaster-relief work
Outdoor events
Oil and gas work sites
Utility repairs
Ports and warehouses
Airport perimeter work
Railway maintenance
Remote industrial locations
The selected version should match required light output, runtime, mast height, noise restrictions, fuel availability, and mobility needs.
Available custom options may include:
LED or metal-halide lamps
Lamp quantity
Lamp wattage
Mast height
Hand-cranked or hydraulic lifting
Gasoline or diesel engine
Generator size
Fuel-tank capacity
Open-frame or silent enclosure
Housing colour
Logo and branding
Trailer or hand-push chassis
Electrical outlets
Control panel
Each custom unit should receive a final approved technical data sheet before production.
Depending on the selected model, the package may include:
ANJ6150 mobile lighting tower
Lamp assemblies
Q235 steel telescopic mast
Generator set
Engine
Fuel tank
Electrical control panel
Four stabilizing supports
Pneumatic wheels
Hand-push steering handle
Operating tools
User manual
Maintenance documentation
Only verified included items should appear in the final listing.
The listed warranty period is one year.
Before publication, confirm coverage for:
Lamp heads
Metal-halide ballasts
LED drivers
Engine
Generator
Mast
Winch or hydraulic system
Electrical controls
Fuel system
Wheels and brakes
Labour
Replacement parts
Shipping costs
Place the lighting tower on stable, level ground and fully deploy all four stabilizers before raising the mast.
Do not raise or operate the mast beyond the verified wind-speed limit. Keep the tower away from overhead electrical lines, cranes, buildings, trees, and other obstructions.
Allow metal-halide lamps to cool before handling. Hot lamps may require a delay before restarting.
Operate gasoline and diesel engines only in properly ventilated outdoor environments. Exhaust gases contain carbon monoxide.
Use trained personnel for generator maintenance, electrical repairs, mast inspection, lamp replacement, and hydraulic servicing.