- Total R 0.00
Improve pallet transport, warehouse stacking, loading, and industrial material handling with this 3-Ton Electric Forklift. The reference configuration provides a rated lifting capacity of approximately 3,000 kg, a standard lifting height of 3,000 mm, and a rechargeable 60V/120Ah battery system.
Its electric powertrain supports quieter operation and produces no direct exhaust emissions at the point of use. The forklift may be suitable for warehouses, manufacturing facilities, logistics centres, farms, workshops, retail storage areas, and selected outdoor paved environments.
The supplier also references lifting capacities from 1,000 kg to 4,500 kg. Each capacity should be listed separately with its own dimensions, vehicle weight, motor power, battery specification, mast configuration, and final price.
3,000 kg reference lifting capacity
3,000 mm rated lift height
60V/120Ah rechargeable battery system
Fully electric operation
Custom colour and logo options
Suitable for warehouse and industrial handling
Compact listed dimensions
Custom capacity options available
CE certification, subject to verification
Factory-tested equipment
Suitable for commercial and industrial applications
Brand: Confirm Before Publishing
Model: Confirm Before Publishing
Product Type: Electric Forklift
Condition: New, subject to confirmation
Reference Rated Capacity: 3,000 kg
Available Capacity Range: Approximately 1,000–4,500 kg
Power Source: Rechargeable Electric Battery
Battery Voltage: 60V
Battery Capacity: 120Ah
Stored Battery Energy: Approximately 7.2kWh, subject to usable-capacity confirmation
Battery Chemistry: Confirm Before Publishing
Rated Lift Height: Approximately 3,000 mm
Load Centre: Confirm Before Publishing
Mast Type: Confirm Before Publishing
Fork Length: Confirm Before Publishing
Fork Width: Confirm Before Publishing
Operating Mode: Confirm as Seated, Standing, or Ride-On
Drive Type: Confirm Before Publishing
Motor Power: Confirm Before Publishing
Charging Time: Confirm Before Publishing
Operating Time per Charge: Confirm Before Publishing
Listed Climbing Angle: 25°, subject to verification
Machine Dimensions: Approximately 2,500 × 1,200 × 2,300 mm
Vehicle Weight: Confirm Before Publishing
Tyre Type: Confirm Before Publishing
Turning Radius: Confirm Before Publishing
Travel Speed: Confirm Before Publishing
Colour: Customizable
Logo Customization: Available
Certification: CE, subject to valid model documentation
Warranty: Confirm Before Publishing
Country of Origin: Shandong, China
The reference configuration is listed with a rated lifting capacity of 3,000 kg.
Actual safe lifting capacity may be reduced by:
Increased load-centre distance
Higher lifting positions
Extended forks
Optional attachments
Uneven load distribution
Sloped or unstable surfaces
Non-standard mast configurations
The final forklift data plate should show the approved capacity for the exact mast, fork, battery, and attachment configuration.
The forklift uses a listed 60V/120Ah battery system. Based on these figures, the nominal stored energy is approximately 7.2kWh.
Before publishing, confirm:
Battery chemistry
Number of battery modules
Total and usable capacity
Battery-management system
Charger input voltage
Charger output voltage and current
Charging time
Typical operating duration
Battery cycle life
Battery warranty
Battery replacement procedure
Lithium-ion and lead-acid versions should be listed separately when both are available.
The standard lifting height is listed as approximately 3,000 mm.
Before publication, confirm:
Mast type
Number of mast stages
Lowered mast height
Free-lift height
Fully raised mast height
Lift speed
Lowering speed
Mast tilt angles
Residual capacity at maximum height
Higher mast options may reduce the forklift’s remaining lifting capacity.
The supplier lists a climbing angle of 25°. This is a significant performance claim and should only be published after verification.
Confirm whether the figure applies to:
Loaded operation
Unloaded operation
Maximum temporary gradeability
Continuous slope operation
Dry paved surfaces only
Gradeability can change according to load, battery level, tyre type, slope length, surface traction, and operating speed.
The listed dimensions are approximately:
Length: 2,500 mm
Width: 1,200 mm
Height: 2,300 mm
Confirm whether these measurements include:
Forks
Mast
Overhead guard
Battery compartment
Optional attachments
Exact dimensions are required for aisle planning, transport, container loading, and doorway clearance.
Electric power supports:
Lower operating noise
No direct exhaust emissions during use
Reduced routine engine maintenance
Indoor warehouse suitability
Smooth low-speed control
Rechargeable operation
Indoor suitability also depends on tyre type, floor loading, turning radius, and electrical protection.
The supplier references forklifts between approximately 1,000 kg and 4,500 kg.
Possible variants may include:
1,000 kg
1,500 kg
2,000 kg
2,500 kg
3,000 kg
3,500 kg
4,000 kg
4,500 kg
Each capacity should include its own:
Model number
Motor power
Battery voltage and capacity
Lift height
Mast type
Vehicle weight
Turning radius
Fork dimensions
Dimensions
Final price
This electric forklift may be suitable for:
Warehouses
Manufacturing plants
Logistics centres
Retail distribution
Workshops
Farms
Building-material facilities
Food and beverage storage
Loading bays
Indoor industrial transport
Suitable outdoor paved yards
Rough terrain, steep slopes, wet environments, or hazardous areas may require a specially equipped forklift.
Available customization may include:
Load capacity
Battery type
Battery capacity
Charger specification
Lift height
Mast configuration
Fork dimensions
Tyre type
Body colour
Company logo
Warning lights
Operator cabin
Side shifter
Fork positioner
Weather protection
Each customized unit should receive a final approved specification sheet.
Professional unloading and commissioning are recommended. Initial checks should include:
Battery and charger compatibility
Fork alignment
Mast and lift-chain inspection
Hydraulic-system checks
Steering and brake testing
Tyre inspection
Safety-device testing
Capacity-plate verification
Operator training
Only trained and authorized personnel should operate the forklift. Never exceed the rated capacity shown on the final data plate.
Keep loads low while travelling, avoid sudden turns, and operate only on approved surfaces and slopes.
Inspect the forks, mast, chains, battery, hydraulics, tyres, steering, brakes, controls, and warning devices before every shift.